Ballistic weapons are not just rockets that fly in an arc. Their principle of operation is based on the fact that after acceleration in the atmosphere, a shell or rocket moves by inertia in the field of gravity, like a thrown stone or a shell fired from a cannon. That is why the trajectory of such weapons is called ballistic.
The entire path of a ballistic missile from launch to target is divided into three distinct stages.
Active segment (acceleration). The rocket takes off vertically or at an angle, the engines are working, accelerating it to an enormous speed. At this stage, navigation systems work, setting the direction and speed for the subsequent passive flight. As soon as the fuel runs out, the engines are turned off, and the rocket moves on to the next phase.
Passive segment (free flight). This is the longest part of the journey (for intercontinental missiles up to 20 minutes). The rocket flies in space, where there is no air, and the only force acting on it is the gravity of the Earth. It is at this stage that the warheads are separated, if the rocket is equipped with a separating warhead: each warhead or decoy begins its own path to the target.
Terminal segment (entry into the atmosphere). The warhead enters the dense layers of the atmosphere at an enormous speed (up to 20 Mach and above) and flies towards the target. Here it experiences colossal loads and heating: the temperature can reach thousands of degrees, and the loads can reach 50 G. Modern warheads can maneuver at this stage to avoid interception.
The main difference between a ballistic missile and a guided bomb or cruise missile is the absence of an engine and aerodynamic surfaces for most of the journey. Therefore, its accuracy depends on how accurately it was accelerated at the very beginning.
Early ballistic missiles had a huge dispersion (circular probable error — CPE — in kilometers). Modern missiles use inertial systems (gyroscopes and accelerometers) that track accelerations and turns, as well as satellite navigation (GPS/GLONASS) for course correction. Thanks to this, the CPE of the best models (such as Trident II or Iskander) has been reduced to tens of meters.
It is important to understand the difference between types of warheads. If a ballistic missile carries a nuclear warhead, its accuracy is not so important: one warhead can destroy an entire city. If, however, the missile is equipped with a conventional high-explosive warhead, then a very high degree of accuracy is required to hit a fortified target (such as a command post or a depot). That is why early conventional ballistic missiles were considered area weapons, and modern ones are becoming more and more accurate.
Ballistic missiles represent a challenging target for air defense and missile defense systems for several reasons.
| Phase | What happens | Characteristics |
|---|---|---|
| Active segment | Acceleration by engines | Navigation systems are working |
| Passive segment | Free flight by inertia | Separation of warheads, up to 20 minutes |
| Terminal segment | Entry into the atmosphere | Heating, loads up to 50 G, maneuvering |
The principle of operation of ballistic weapons is simple: a powerful engine accelerates the shell to an enormous speed and releases it into free flight according to the laws of gravity. The complexity and power of this weapon lie in the accuracy of calculating this arc and the ability of the warhead to survive the terrible heating upon re-entry into the atmosphere.
New publications: |
Popular with readers: |
News from other countries: |
![]() |
Editorial Contacts |
About · News · For Advertisers |
U.S. Digital Library ® All rights reserved.
2014-2026, LIBMONSTER.COM is a part of Libmonster, international library network (open map) Keeping the heritage of the United States of America |
US-Great Britain
Sweden
Serbia
Russia
Belarus
Ukraine
Kazakhstan
Moldova
Tajikistan
Estonia
Russia-2
Belarus-2